1. Check For Writer Connected

- The following step must operate with the USB writer connected, check the status of the writer on the lower right panel.

2. Load File

- Click the "Load" button to load file.

- Software will show the saved information on the screen.

2. Erase, Write Or Verify

- Click the "Erase", "Write" or "verify" button to program file to the chip.

- Check if power or battery is already removed, then click "Yes" button.

- Software will show the progress in the panel.

Erase
  Erase data on the chip.

Write
  Erase and copy file to the chip, then verify with file.

Verify
  Verify the chip is programmed correctly.